Letoto la SUP600 High Power Resistor
Ho nyatsa
Derating (thermal resist.) SUP600: 8.47W/K (0.12 K/W)
Tekanyo ea matla: 600 W ho 85°C mocheso oa boemo bo tlase
Boleng bona bo sebetsa feela ha ho sebelisoa mocheso oa mocheso ho siling ea mocheso Rth-cs<0.025K/W.Boleng bona bo ka fumanoa ka ho sebelisa motsoako oa ho fetisa mocheso o nang le mocheso oa mocheso oa bonyane 1 W / mK.Bophahamo ba poleiti e pholileng e tlameha ho ba betere ho feta 0.05 mm ka kakaretso.Bokhopo ba bokaholimo ha boa lokela ho feta 6.4 μm.
Litekanyo ka limilimithara
Litlhaloso
| Mekhahlelo ea ho hanyetsa | 0.1 Ω ≤ 0.2Ω (HC-version)> 0.2Ω ≤ 1 MΩ (litekanyetso tse holimo ho kopo) |
| Resistance Tolerance | ± 5% ho ± 10 % ± 1% ho ± 2% ka kopo e khethehileng ea litekanyetso tse fokolang tsa ohmic ka ho fokotseha ha max.tekanyo ea matla / pulse (botsa lintlha) |
| Mocheso Coefficient | ±500PPM/℃(0.1 Ω ≤ 0.2Ω) maemo ±150PPM/℃(> 0.25 Ω ≤ 1 MΩ) maemoTCR e tlase ka kopo e khethehileng ea boleng bo fokolang ba ohmic |
| Tekanyetso ea matla | 600 W ka 85°C mocheso oa boemo bo tlase |
| Nako e telele e boima | 720 W ho 70°C bakeng sa 10sec., ΔR = 0.4% max. |
| Boholo ba matla a ho sebetsa | 5,000 V DC = 3.500 V AC RMS (50 Hz) motlakase o phahameng ha o kopa, o sa feteng max.matla |
| Matla a matla a motlakase | 7 kVrms / 50 Hz / 500 VA, nako ea teko motsotso o le 1 lipakeng tsa terminal und case (ho fihla ho 12 kVrms ka kopo)matla a motlakase a ka holimo ho 10 kVrms a lekoa ho DC ho lekana ho qoba peletshenyo ya karolo |
| Insulation resistance | > 10 GΩ ho 1,000 V |
| Voltage e le 'ngoe | ho fihla ho 12 kV norm wave (1.5/50 μsec) |
| Sebaka se hahabang | 29mm (e tloaelehileng, e phahameng ka kopo) |
| Sebaka sa moea | > 14 mm (e tlwaelehileng, e phahameng ha o e kopa) |
| Inductance | ≤ 80 nH (e tloaelehileng), ho lekanya maqhubu a 10 kHz |
| Bokhoni/boima | ≤ 140 pF (e tloaelehileng), ho lekanya maqhubu a 10 kHz |
| Bokgoni (bo-kgo-na) /parallel | ≤ 40 pF (e tloaelehileng), ho lekanya maqhubu a 10 kHz |
| Mocheso oa ho sebetsa | -55°C ho ea ho +155°C |
| Ho phahamisa - torque bakeng sa mabitso | 1.8 Nm ho isa ho 2 Nm |
| Ho phahamisa - torque | 1.6 Nm ho isa ho 1.8 Nm M4 screws |
| Phapang ea lithapo e fumaneha ka kopo | HV-cable / Flying lead (botsa lintlha) |
| Mofuta oa cable o tloaelehileng | H&S Radox 9 GKW AX 1,5mm2 (mefuta e meng ea lithapo ka kopo e khethehileng) |
| Boima ba 'mele | ~73.3g |
Ho Odara Boitsebiso
| Mofuta | ohmic | BolengTOL |
| SUP600 | 100K | 5% |
Boemo ba Khoebo
SHENZHEN SONGHOO CO., LTD.e hlahisa le ho hlahisa likaroloana tsa bohlokoa tsa ts'ebetso ho latela ketane eohle ea boleng ba matla.Lihlahisoa tsa rona li etsa tlatsetso ea bohlokoa molemong oa tlhahiso e sebetsang hantle le e tšoarellang, phetiso, polokelo le ts'ebeliso ea matla.Lisebelisoa tsa motlakase tsa SONGHOO, likarolo tsa e-mobility li sebelisoa lefatšeng ka bophara lits'ebetsong tse kang likoloi, likepe, lifofane, li-turbine tsa moea kapa li-grid tsa motlakase.
Haholo-holo e tšoarehile lipatlisisong le nts'etsopele le tlhahiso ea li-resistors tse matla tsa filimi e teteaneng tse se nang inductive le li-resistors tse nang le matla a phahameng a matla le a phahameng haholo;Ke khoebo ea theknoloji e phahameng e sebetsanang le li-resistors tse khethehileng;
LBH
A: Re fana ka tšebeletso ea ntlo le ntlo ea DDP, u hloka feela ho re lefa, ebe u emela ho fumana taelo.
Thepa ea hau e sebetsoa ka tlhokomelo e kholo ho tloha nakong ea ho reka ho isa ho pepa.Kamora ho hlahloba OA .re sebelisa k'hothone ea foam le k'hothone ea perela ho thatela sengoathoana se seng le se seng sa sehlahisoa e le hore se fihle letsohong la hau se le maemong a phethahetseng.Li-vacuum bags & mabokose a lepolanka .re sebelisa bakeng sa ho paka thepa ea rona li khethiloe ka hloko ho netefatsa hore ha ho na mafome a hlahang nakong ea ho romelloa ka leoatleng, e leng se ka bakang tšenyo e tebileng ho thepa ea hau.
Re ts'episa bareki hore lihlahisoa tsohle tsa rona nakong ea tiisetso, haeba ho na le bothata, re tla amohela phetoho le ho khutlisa ntle le maemo.
Karabelo e potlakileng ke maemo a bareki ba rona ba lits'ebeletso, lipotso tsohle tsa hau li tla arajoa kapele.
